We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Conical Screw Sort Chemical Powder Mixer
Quick INTRODUCTION:
The PerMix PNA sequence Conical Screw Mixer is a batch mixing tools utilised commonly in mixing purposes that need mild mixing with small merchandise distortion, minimum warmth technology, and very precise mixing homogeneity. Given that it was initial created a lot more than 60 many years in the past, it has been regarded as a great answer for the items which is sensitive, heat delicate or tending to segregate.
Owing to the purpose the PerMix Conical Screw Mixer uses the gravity to produce the considerable downward massflow, it will save power compared with a horizontal mixer.
These Conical Screw Mixers are also showcased with no contamination to the product during the mixing, thanks to the fact that the shaft sealing & bearing is over the wor ept region, thus no get in touch with with the solution.
HOW IT Performs:
Inside of of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, a few screws according to specified software) rotating by its own axle which is in parallel to and close to the wall of the cone vessel. The mixing screw lifts the product close to it from base to the leading, and then the powder falls down thanks to the gravity, creating a convective mixing.
At the identical time, the screw is supported by an orbital arm and is rotating around the center of the cone like a planetary, so that the powders in each corner of the cone can be combined by the screw, and a 3-dimentional mixing overall performance takes place inside of the entire cone.
Alternatives:
– Feeding & Discharging
A assortment of feeding & discharging strategies obtainable.
– Screw Variety
We offer one screw, double screw and triple screw to give different mixing depth.
– Drive method
Drive method by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, and many others.
– Construction Substance and Finish
We are in a position to offer our PVR Mixers with get in touch with portion to be constructed in Carbon metal, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. End of inner and exterior complete can be boring polished, one hundred eighty grit polished (foods quality), or mirror polished. For abrasive supplies we supply hardened steel as the get in touch with component.
– Spray nozzle
Liquid can be added into the powder by spray nozzles on the leading.
– Heating/Cooling jacket
Jacketed trough for heating/cooling procedure
– Vacuum drying & deaerating
PNA Conical Screw Mixers can be created to a vacuum mixer dryer for vacuum drying & deaerating or for interior stress wor ept for particular programs.
Apps:
– Animal Treatment
Animal Feeds, Rooster Fattening Feed, Fish Foods, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Medicine
– Chemical compounds
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Prescribed drugs, Pigments, Plastic Additives, Resins, Reliable Lubricants
– Daily Treatment
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
– Developing Materials
Ornamental Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composite
Technical specs of Conical Screw Mixer:
Product | Complete volume (liter) |
Wor ept quantity (liter) |
Energy (*) (kW) |
RPM | Dia. (mm) |
H, overall height (**) (mm) |
Inlet (***) (mm) |
Outlet (****) (mm) |
Excess weight (kg) |
PNA-200 | 200 | a hundred and twenty | two.2+.37 | a hundred and forty/two | 888 | 1557 | 140 | 230 | 500 |
PNA-three hundred | three hundred | a hundred and eighty | 2.2+.37 | one hundred forty/two | 990 | 1722 | one hundred eighty | 230 | 550 |
PNA-five hundred | five hundred | three hundred | 3+.55 | one hundred forty/2 | 1156 | 1991 | 200 | 230 | 600 |
PNA-800 | 800 | 480 | 4+.55 | 60/two | 1492 | 2256 | 250 | three hundred | 950 |
PNA-a thousand | 1000 | 600 | 4+.fifty five | 60/two | 1600 | 2432 | 300 | 300 | 1200 |
PNA-1500 | 1500 | 900 | 5.5+.75 | sixty/two | 1780 | 2725 | three hundred | 300 | 1350 |
PNA-2000 | 2000 | 1200 | 5.5+.75 | sixty/2 | 1948 | 3001 | 350 | 350 | 1500 |
PNA-2500 | 2500 | 1500 | seven.5+1.five | 60/two | 2062 | 3571 | 350 | 350 | 1800 |
PNA-3000 | 3000 | 1800 | seven.5+1.five | 60/two | 2175 | 3207 | 350 | 350 | 2100 |
PNA-4000 | 4000 | 2400 | eleven+2.2 | 40/two | 2435 | 4571 | four hundred | four hundred | 2500 |
PNA-5000 | 5000 | 3000 | fifteen+2.two | forty/2 | 2578 | 4260 | four hundred | four hundred | 3000 |
PNA-6000 | 6000 | 3600 | 18.5+3 | 40/2 | 2715 | 4470 | 400 | 400 | 3500 |
PNA-8000 | 8000 | 4800 | 22+three | 40/1.three | 2792 | 5000 | 400 | 450 | 3800 |
PNA-ten thousand | ten thousand | 6000 | thirty+four | 40/1.three | 3000 | 5240 | five hundred | 450 | 4300 |
one. (*) (**) (***) (****): Alterations are accessible according to the customer’s ask for.
two. Customized dimensions offered as per request
three. All specifications and illustrations are as correct as is moderately attainable, but they are not binding.
four. PerMix reserves the appropriate to modify the design and style without having recognize.
Machine Particulars:
Our Customers:
Much more Items by PerMix:
PerMix Advantages:
FAQ:
Q: What is your price level when compared with European suppliers and nearby Chinese suppliers?
A: Depending on the machine variety and dimension, our price tag amount is thirty%-sixty% less than the European suppliers and 5-fifteen% greater than the big neighborhood suppliers.
Q: Are you ready to give tailor-made design and production for the mixers?
A: Of course, in reality far more than half of our mixers are tailor manufactured, which is one particular of our sturdy factors.
Q: Are you able to design and generate other processing products?
A: We are open to talk about about it.
Q: Can you provide machines to OEM clients, which means to label their makes on the devices.
A: Of course we are doing it a good deal. We have numerous OEM associates in the United states.
Q: Do you have agent community out of China?
A: Sure we do have brokers but only in some countries, for illustration in United states, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are even now loo ept for much more brokers because we believe to function with brokers is the best way to do organization.
Q: What is your supply lead time of the mixing gear.
A: Based on the size and level of customization, but normally it is from 6-fourteen weeks.
Q: How do you pack and ship the mixing equipment?
A: For equipment don’t require full container loading, we will pack them in picket case. For FCL (total container loading) shipment, we will just wrap the devices in plastic films and resolve them in the container. The shipment can be both by air or by sea
The use of authentic equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the shown alternative components contained herein are not sponsored, authorized, or produced by the OEM.